Loading ...
Loading ...
Loading ...
Programme
1)
Water
(l)
Energy
(kWh)
Duration
(min)
P3
FlexiWash
14 - 16 1.2 - 1.5 160 - 180
P4
Intensive
12.5 - 14.5 1.4 - 1.7 170 - 190
P5
Glass Care
12 - 14 0.7 - 0.9 82 - 92
P6
Quick Plus
10.5 0.9 30
P7
Rinse & Hold
4 0.01 14
1)
The pressure and the temperature of the water, the variations of the mains supply, the
options and the quantity of dishes can change the values.
5.2 Information for test
institutes
To receive the necessary information for
conducting performance tests (e.g.
according to EN60436), send an email
to:
In your request please include the
product number code (PNC) found on
the rating plate.
For any other questions regarding your
dishwasher please refer to the service
book provided with your appliance.
6. SETTINGS
6.1 Programme selection mode
and user mode
When the appliance is in programme
selection mode, it is possible to set a
programme and to enter user mode.
Settings available in user mode:
• Activation or deactivation of the rinse
aid empty notification.
• The level of rinse aid according to the
required dosage.
• Activation or deactivation of the
acoustic signal for the end of a
programme.
• Activation or deactivation of the
AirDry.
As the appliance stores the saved
settings, there is no need to configure
it before every cycle.
How to set the programme
selection mode
The appliance is in programme selection
mode when the display shows the
programme number P1.
After activation, the appliance is in
programme selection mode by default. If
not, set the programme selection mode
the following way:
Press and hold simultaneously and
until the appliance is in programme
selection mode.
How to enter user mode
Make sure the appliance is in
programme selection mode.
To enter user mode, press and hold
simultaneously and until the
ENGLISH 9
Loading ...
Loading ...
Loading ...