Loading ...
Loading ...
Loading ...
3-16
Instruments and controls
It blinks when the skid suppression function is activat-
ed. It illuminates when only the traction control func-
tion is operating.
The VDC system is probably faulty under any of the
following conditions. Have your vehicle checked at a
SUBARU dealer immediately.
y The light does not come on when the ignition switch
is turned to the “ON” position.
y The light does not go out even after a period of
about 2 seconds after the ignition switch has been
turned to the “ON” position.
VDC (Vehicle Dynamics Control)
OFF indicator light (if equipped)
y This indicator light comes on when the ignition
switch is turned ON and goes out about 6 seconds af-
ter the engine has started.
y It comes on when the VDC system is deactivated
(by operating “VDC OFF” switch or in the standby
state).
NOTE
y The light may stay on for a while after the engine
has been started, especially in cold weather. This
does not indicate the existence of a problem. The
light should go out as soon as the engine has
warmed up.
y The “VDC OFF” indicator light comes on when
the engine has developed a problem and the
CHECK ENGINE warning light is on.
The VDC system is probably faulty under any of the
following conditions. Have your vehicle checked at a
SUBARU dealer as soon as possible.
y The VDC OFF indicator light does not come on
when the ignition switch is turned to the “ON” position.
y The light does not go out even after several minutes
have passed (the engine has warmed up) after the en-
gine has been started.
Security system status indicator
light (if equipped)
This light is found at the bottom center of the combina-
tion meter panel.
On vehicles equipped with a security system, it blinks
to show the driver the operational status of the security
system. For detailed information, refer to the “Security
system (if equipped)” in Chapter 2.
Loading ...
Loading ...
Loading ...