Loading ...
Loading ...
Loading ...
2-35
Keys and doors
– CONTINUED –
The front moonroof has a tilting function and the rear
moonroof has a sliding function.
Both moonroofs operate only when the ignition switch
is in the “ON” position.
1) Open
2) Close
To open the moonroof(s)
1. Open the front sunshade.
2. Continually push the rear side (OPEN) of the
switch, and the front moonroof will tilt up and stop au-
tomatically.
3. If you want to open the rear moonroof as well, re-
lease the switch once and then push the rear side of
the switch continuously.
The rear moonroof will begin to slide open together
with the rear sunshade, then stop automatically at 7.9
in (20 cm) in a partially open position.
4. To fully open it, release the switch once, then push
the rear side of the switch again and keep it depressed
until the full open position is reached.
To close the moonroof(s)
1. Push the front side (CLOSE) of the switch. The rear
moonroof will slide to close together with the rear sun-
shade while the switch is being pressed, then stop au-
tomatically at a position 5.9 in (15 cm) away from the
fully closed position.
2. To close the rear moonroof fully, release the switch
once, then push the front side of the switch continu-
ously again.
3. If you want to close the front moonroof as well,
push the switch again.
After washing the vehicle or after it rains, wipe away
water on the roof prior to opening the moonroof to pre-
vent water drops from falling into the passenger’s
compartment.
NOTE
y Driving with the moonroof fully open can cause
a great deal of wind noise. If such a condition has
been encountered, close the moonroof up to the
1
2
UB2006BB
Loading ...
Loading ...
Loading ...