Loading ...
Loading ...
Loading ...
SAFETY INSTRUCTIONS
4
immersing it in water.
• Any service other than regular cleaning
or filter replacement should be
performed by an authorized service
representative or a qualified air
conditioning engineer. Failure to comply
could result in a voided warranty.
• This air conditioner is intended for
cooling / heating a room to a suitable
level for human comfort, and should not
be used for any other purpose such as
cooling food.
• Avoid restarting the air conditioning unit
unless 3 minutes have passed since
being turned off. This prevents damage
to the compressor.
• Never use the mains as a switch to start
and turn off the air conditioning unit. Use
the provided ON/OFF button located on
the remote control.
• The indoor unit should not be installed in
laundry or wet rooms.
• Diagrams and pictures provided within
the manual are for guidance only. Due
to continual product development, if
there is any variance between the
manual and the product received, the
information provided on the product
should be followed.
ENERGY SAVING AND UNIT SAFETY
PROTECTION TIPS
• Do not cover or restrict the airflow from the
outlet or inlet grills.
• For maximum performance the minimum
distance from a wall or objects should be
50cm.
• Keep the filters clean. Under normal
conditions, filters should only need cleaning
once every four weeks (approximately).
Since the filters remove airborne particles,
more frequent cleaning maybe necessary,
depending on the air quality.
• For the initial startup set the fan speed to
maximum and the thermostat to 4-5 degrees
lower than the current temperature. After, set
the fan switch to low and set the thermostat
to your desired setting.
• To protect the unit we recommend not using
the cooling mode when the ambient indoor
temperature is higher than 35℃.
• To protect the unit we recommend not using
the heating mode when the indoor ambient
temperature is lower than 7℃. Performance
will be reduced at lower temperatures.
• Note the manufacturer operating temperature
ranges at the end of this user manual.
Loading ...
Loading ...
Loading ...