Loading ...
Loading ...
Loading ...
6
Installing Your Wine Refrigerator
The wine refrigerator should be installed in accordance with local electrical code requirements. It should also be placed
in a location that is strong enough to support its total weight, keeping in mind that it will weigh substantially more when
fully loaded than when empty.
Before you plug the wine refrigerator into a power supply, be sure to let it stand upright for at least 24 hours to allow
the compressor’s oils to settle.
WARNING: Use two or more people to move and install the wine refrigerator. Failure to do so can result in back or other
injury. Carefully remove the packaging materials. Remove any shipping tape and glue from your wine refrigerator
before using. Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or
glue. These products can damage the surface of your wine refrigerator.
IMPORTANT: Do not remove any safety, warning, or product information labels from your wine refrigerator.
TYPES OF INSTALLATION:
This wine refrigerator has been designed for free-standing or built-in installation. In every case, there must be adequate
ventilation and access for service.
Free-standing installation: A free-standing installation will allow you to install the wine refrigerator in almost any place
you desire. You must follow the stated instructions for electrical requirements and leveling the wine refrigerator.
Built-in installation: A recessed installation will allow you to install the wine cooler under a counter or in a kitchen
cabinet provided the clearance space requirements around the wine cooler are followed. It is necessary to allow
adequate ventilation space around the unit (make sure there is at least some ventilation room for the back of the unit).
The following additional items must be observed:
1. Place the wine refrigerator in front of the installation location.
2. Adjust the feet and place the unit flat on the floor or on a platform depending on your installation requirements.
3. If the electrical outlet for the wine refrigerator is behind the cabinet, plug in the wine refrigerator.
4. Push the wine refrigerator into position.
WARNING: Do NOT install the wine refrigerator behind a closed cabinet door.
Loading ...
Loading ...
Loading ...