Loading ...
Loading ...
Loading ...
C
9 Put the steam control needle back into the iron by inserting
the point of the needle exactly in the centre of the hole and by
fitting the small projection on the side of the needle into the
slot. Set the steam control to position O.
10 Repeat the Calc-Clean process if the iron still contains a lot of
impurities.
After the Calc-Clean process
1 Put the plug in the wall socket and let the iron heat up to allow
the soleplate to dry.
2 Unplug the iron when the temperature light has gone out.
3 Move the iron gently over a piece of used cloth to remove any
water stains that may have formed on the soleplate.
4 Let the iron cool down before you store it.
After ironing
1 Set the steam control to position O, remove the plug from the
wall socket and let the iron cool down.
C
2 Empty the water tank. Regularly rinse the water tank with
water.
3 Clean the upper part of the appliance with a damp cloth.
4 Wipe scale and any other deposits off the soleplate with a
damp cloth and a non-abrasive (liquid) cleaner.
Never use a scouring pad, vinegar or other chemicals to clean the
soleplate.
Keep the soleplate smooth: avoid hard contact with metal objects.
Storage
1 Make sure the steam control has been set to position O, the
plug has been removed from the wall socket and the iron has
cooled down.
C
2 Wind the mains cord round the cord storage facility.
3 Always store the iron standing on its heel in a safe and dry
place.
ENGLISH12
Loading ...
Loading ...
Loading ...