Loading ...
Loading ...
Loading ...
Fuel fill cap removal and installation
50 STATE (meets California)
50 STATE versions of this vehicle are
equipped with an evaporative emission
control system.
(P.88
)
For the system to function properly, observe
the following when removing and installing
the fuel fill cap.
a
To open the fuel fill cap, turn the cap
counterclockwise.
u
Do not disconnect the breather tube.
b
To close the cap, align the tabs of the fuel fill
cap to the slots of the filler neck with the
arrow mark on the cap towards the rear of
the vehicle.
c
Turn the cap clockwise until the arrow mark
points towards the front.
u
Make sure that the breather tube is not
twisted or blocked when the cap is
secure in place.
NOTICE
If you replace the fuel fill cap, use only a Honda
Genuine replacement parts or its equivalent.
Failure to use the proper part could cause
serious fuel system problem.
Operation Guide
28
Refueling (Continued)
Breather tube Arrow mark
Fuel fill cap
Loading ...
Loading ...
Loading ...