Loading ...
Loading ...
Loading ...
||
LOADING, STORAGE AND PASSENGER COMPARTMENT
608
Fitting the safety net
Rear fitting
1. If necessary, fold the rear seat backrests
forward in order to facilitate installation.
2. Lower the safety net cassette's end pieces
over the mounting eyelets in the recess of
the side panels. Press down the end piece
one side at a time. Check that the cassette
is properly secured.
3. Pull up the net.
4. Hook one of the safety net's retaining
hooks into the rear roof mounting and
then press it forward to the end position.
5. Hook the other of the safety net's retain-
ing hooks on the opposite side and press
it forward to the end position.
Front fitting
1. Fold the rear seat's backrest forward.
2. Align the safety net cassette's anchor rails
in front of the backrest's attachment lugs.
3. Slide the cassette into the attachment
lugs.
4. Pull up the net.
5. Hook one of the safety net's retaining
hooks into the front roof mounting and
then press it forward to the end position.
6. Hook the other of the safety net's retain-
ing hooks on the opposite side and press
it forward to the end position.
Removing the safety net
1. Undo the safety net from the roof mount-
ings by pressing the retaining hooks back-
wards. Allow the net to roll into the cas-
sette.
2.
Rear fitting:
Press the button on each side of the cas-
sette in order to release the end pieces
from the mounting eyelets. Lift out the
safety net.
Front fitting:
Slide the cassette from the attachment
lugs and lift out the safety net.
Related information
•
Recommendations for loading (p. 600)
•
Load retaining eyelets (p. 602)
Loading ...
Loading ...
Loading ...