Loading ...
Loading ...
Loading ...
EN - 21
MAINTENANCE
SPRAY TIP MAINTENANCE (See Figure 11.)
Excessive pump pressure (a pulsing sensation felt while squeezing the trigger) may be the result of a
clogged or dirty spray tip.
Ŷ Unplug the pressure washer.
Ŷ Turn off the pressure washer and shut off the water supply. Pull trigger to release water pressure.
Ŷ Remove the spray tip from the spray wand.
NOTE: Never point the spray wand at your face.
Using the spray cleaner provided, free any foreign materials clogging or restricting the spray tip
opening. Refer to Fig. 11
Ŷ Using a garden hose, flush debris out of the spray tip by back flushing (running the water through the
spray tip backwards or from the outside to the inside).
Ŷ Reconnect the spray tip to the spray wand.
Ŷ Turn on the water supply.
STORING THE PRESSURE WASHER
Store in a dry, covered area where the weather can’t damage it. It is important to store this product in
a frost-free area. Always empty water from all hoses, the pump, and the detergent container before
storing.
NOTE: Use of a pump saver will give you better performance and increase the life of the machine.
Fig. 11
Loading ...
Loading ...
Loading ...