Loading ...
Loading ...
Loading ...
OPERATION ON AC POWER
Plug one end of provided AC cord into the AC input jack on the left side of the
amplifier. Then plug the other end of AC cord into AC power outlet. Turn on the
unit using the power/volume switch.
NOTE: To avoid damaging your unit, make sure AC power is same as that
marked near AC input jack)
OPERATION ON DC POWER
This unit can be powered also using external 12V DC power. Connect external
12V DC power to DC input jack on front panel of the amplifier. Observe the
correct polarity as following.
OPERATION ON RECHARGEABLE BATTERY
This unit can be powered internally using the built-in rechargeable battery.
When AC power is connected, if battery charging indicator lights red the
rechargeable battery is not fully charged and will be allowed to charge while
the unit is powered by the AC power. (Note: Turning off the unit power switch
will allow the battery to recharge more quickly.) If the battery charging indicator
lights green, the battery is fully charged and ready to power the unit alone.
Shut off the power switch and disconnect the AC power. Turn the unit back on
and the rechargeable battery will power the unit alone.
OPERATION ON UM-1 BATTERIES
This unit can also be powered internally with (6X) UM-1batteries. Insert the
batteries while observing the correct polarity as marked. For longest operation
use only alkaline or rechargeable batteries. Replace the batteries when the
output volume drops or the range of the wireless decreases.
Note: This unit does not recharge UM-1 batteries. When use UM-1 batteries,
do not connect AC or DC power.
Loading ...
Loading ...
Loading ...