Loading ...
Loading ...
Loading ...
88 GETTING TO KNOW YOUR VEHICLE
TRI-FOLD TONNEAU COVER — IF EQUIPPED
The Tri-Fold Tonneau Cover can be installed on
the truck bed to protect your gear and cargo.
TRI-FOLD TONNEAU COVER REMOVAL
To remove the Tonneau Cover, use the following
steps:
1. Open the tailgate to gain access to the rear
pair of Tonneau Cover clamps located on
the underside of the cover.
Location Of Rear Clamps
NOTE:
If clamp wire is damaged replace immediately.
2. Pull both clamp handles down to release
the Tonneau Cover’s rear panel.
Released Position
3. From the released position, send the
clamps to the Stowed Position by pushing
from the yellow bumper up.
Stowed Position
CAUTION!
Make sure the Tonneau Cover clamp and
clamp wire are in the proper stowed position.
If the clamp and clamp wire are not properly
stowed, damage to the Tonneau Cover
material will result.
21_DS_OM_EN_USC_t.book Page 88
Loading ...
Loading ...
Loading ...