Loading ...
Loading ...
Loading ...
86 GETTING TO KNOW YOUR VEHICLE
(Continued)
To install the bed extender into the extender
position, perform the following:
1. Lower the tailgate.
2. Make sure the center handle is unlocked
and rotate the center handle vertically in
order to release the extender side gates.
3. Fit the end of the side gate ends onto the
pin and handle.
Extender Installation
4. Rotate the handles to the horizontal
position to secure into place.
Locking Tab
WARNING!
To reduce the risk of potential injury or
property damage:
Cargo must be secured.
Do not exceed cargo load rating of your
vehicle.
Secure all loads to truck utilizing cargo tie
downs.
Extender should not be used as cargo tie
down.
When vehicle is in motion do not exceed
150 lbs (68 kg) load on the tailgate.
The bed extender is not intended for off
road use.
When not in use, the extender/divider
should be in stowed or divider position with
the tailgate closed.
When in use all handles are to be in the
locked position.
WARNING! (Continued)
21_DS_OM_EN_USC_t.book Page 86
Loading ...
Loading ...
Loading ...