Loading ...
Loading ...
Loading ...
15En
English
• Call 1-877-438-9677
4 [SUBSCRIPTION UPDATED] appears on the display when your SiriusXM Connect
Vehicle Tuner has been subscribed successfully.
Press any key to clear the activation message.
NOTE
The activation process usually takes 10 minutes to 15 minutes but may take up to an hour in some
cases. Do not turn off the unit until you clear the activation message in step 4.
1 Press and hold DISP, then select [CHANNEL].
You can also select the operation mode by the SiriusXM settings (page 19).
2 Press SRC/OFF to select [SIRIUSXM].
3 Press BAND/ to select a band from [SXM1], [SXM2] or [SXM3].
4 Press / to select a channel.
Pressing and holding either button will rapidly browse through the channels.
Press and hold either button then release to tune automatically. Scanning stops
w
hen the unit receives a channel. To cancel seek tuning, press / .
Basic operations
1 Press and hold DISP to select the operation mode [CHANNEL] or [REPLAY].
NOTE
You can exit the replay mode by pressing and holding BAND/ .
NOTE
You can also make various adjustments in the SiriusXM settings (page 19).
Listening to a channel
Purpose Operation
Select a channel 1 S
et the operation mode to [CHANNEL].
2 Pr
ess or .
Pressing and holding either button will
rapid
ly browse through the channels.
Skip backward/forward 1 S
et the operation mode to [REPLAY].
2 Pr
ess or .
Fast forward or reverse 1 S
et the operation mode to [REPLAY].
2 Pr
ess and hold or .
Category scan
The live broadcast for each channel in the current category plays for six seconds at a
time. Follow the instructions below.
To search for a channel from a list
1 Press during playback.
2 Turn the M.C. dial to select a category.
3 Select one of the operations below.
Category scan: Press and hold the M.
C. dial to switch to category scan.
Channel search: Press the M.
C. dial to stop a scan.
NOTE
Press DISP to change the display information between “Channel Name”, “Artist Name”, “Song Title”,
“Content Info” and “Channel Number”.
Scan options
To preset a channel
1 While receiving a channel you want to store, press and hold one of the number
buttons (1/ to 6/ ) until it stops flashing.
To play the stored channels, select the band and then press a number button (1/ to
6/ ).
To preset a channel from a list
1 While receiving a channel you want to store, press .
2 Turn the M.C. dial to select [PRESETS], then press to confirm.
3 Turn the M.C. dial to select a preset channel.
4 Press and hold the M.C. dial to store.
Purpose Operation
Stopping a scan (selecting the channel or
so
ng playing)
Press the M.C. dial.
Switching to the next/previous song during
Tu
neScan
Press or .
Switching to the next/previous channel
dur
ing the category scan
Press or .
Aborting a scan (The last channel or song
wi
ll continue to play when scan ends.)
Press BAND/ .
Loading ...
Loading ...
Loading ...