Loading ...
Loading ...
Loading ...
Frequently Asked Questions
85
Water intake fault
Problem Possible cause and solution
The In-operation indica-
tor light is flashing
quickly.
The buzzer is sounding.
One of the following
faults appears in the
display:
Open water supply The water supply is turned off.
Turn on the water supply fully.
Intake Before fixing the fault:
Turn the dishwasher off with the button.
There is a problem with the water intake.
Turn on the water supply fully and start the pro-
gram again.
Clean the water intake filter (see “Frequently asked
questions”).
The water pressure at the intake is lower than 4.35
psi.
Contact a plumber.
The following message
appears in the display
during the Energy Saver
program:
Intake temp. low
The intake water has not reached the required tem-
perature of 120°F (45°C) (see “Water connection, Wa-
ter intake”).
Start the program again.
If the fault message appears again, select a differ-
ent program.
Loading ...
Loading ...
Loading ...