User manual Refrigerator

Note: Due to unceasing modification of our products, your refrigerator may be slightly different from this Instruction Manual, but its functions and using methods remain the same.
Note: Shelves and drawers are arranged for optimum energy efficiency on delivery.
The control panel consists of two areas indicating temperatures, six icons representing different modes and 3 touch buttons. When the appliance is powered on for the first time, the backlighting of the icons on display panel starts working. If no buttons have been pressed and the doors are closed,the backlighting will turn off automatically after 60 seconds.
Adjusting the temperature
We recommend that when you start your refrigerator for the first time, the temperature for the refrigerator is set to 3°C and the freezer to -18°C. If you want to change the temperature, follow the instructions below.

Caution! When you set a temperature, you set an average temperature for the whole refrigerator cabinet.
Temperatures inside each compartment may vary from the temperature values displayed on the panel, depending on how much food you store and where you place them. Ambient temperature may also affect the actual temperature inside the appliance.
All the buttons are locked if the icon“ “is illuminated, press the “Mode/ 5s” button for 5 seconds to unlock them.
All the buttons are locked if the icon “
“ is illuminated, press the “Mode/
5s” button for 5 seconds to unlock them.
1. Room.
You can activate Fridge OR Freezer compartment temperature setting by pressing “room” button.
2. Temp.
After fridge temperature setting is activated, press “Temp.” button to set fridge temperature between 8 °C and 2 °C as needed. And the control panel will display corresponding value according to the following sequence.

After freezer temperature setting is activated, press “Temp.” button to set fridge temperature between -15 °C and -21 °C as needed. And the control panel will display corresponding value according to the following sequence.

3. Mode/
5s
You can select different modes by pressing the “Mode/
5s” button. When certain mode is selected, wait for the corresponding icon to flash for 10 seconds. Buzzer will sound two times afterwards and the icon will be illuminated, which means the setting is completed.
4. Super cool

Super Cool can refrigerate your food much faster, keeping food fresh for a longer period
“ light will be illuminated.5. Super Freeze

Super Freeze can quickly lower frozen temperature and freeze your food faster than usual.
This can lock the vitamins and nutrition of fresh food and keep your food longer.
6. Energy saving 
When the function is activated, the temperature of refrigerator is automatically switched to 8℃ and the temperature of freezer is automatically switched to -15℃.
7. Smart 
When the function is activated, the temperature of refrigerator is automatically adjusted Note: If you want to switch off the mode you have selected, simply press the “Room” button and set the temperature of corresponding compartment as you need.
8. Holiday

If you are going to be away for a long period of time such as a long holiday or business trip, you can activate this function by pressing “Holiday” button for 3 seconds until the light will be illuminated.
Important! Do not store any food in the fridge during this time, or they will soon go off.
9. Door Alarm
”on the control panel. In case of door alarm, buzzer will sound 3 times per minute and stop alarm 10 minutes later.10. Temperature alarm
Caution! When power is restored, it is normal to appear temperature alarm and you can press “Alarm” button to clear it.
1. Using your refrigerator compartment
The refrigerator compartment is suitable for storage of vegetables and fruit. Food inside shall be packed to store in order to avoid losing moisture or flavor permeating into other foods.
Caution! Never close the refrigerator door while the shelves, crisper and/or telescopic slides are extended. It may damage both them and the refrigerator.
Door rack

Bottle holder operation

Shelf in refrigerator chamber

Bottle rack
Crispers
Crisper cover
2. Using your freezer drawer
The freezer drawers are suitable for storage of foods required to be frozen, such as meat, ice cream and others.
The drawers
Caution! Ensure that bottles are not stored in the freezer as freezing may cause the bottle to explode.

Twistable ice maker
It is used to make and store ice cubes. You should use it as follows.

Note: If the ice tray is used for the first time or has not been used for a long time, please clean it before using.
Energy saving tips
We recommend that you follow the tips below to save energy.
Hints for fresh food refrigeration
Hints for refrigeration
Hints for freezing
Hints for the storage of frozen food
Switching off your appliance
If the appliance needs to be switched off for an extended period, the following steps should be taken prevent mould on the appliance.
For hygienic reasons the appliance (including exterior and interior accessories) should be cleaned regularly at least every two months.
Caution! The appliance must not be connected to the mains during cleaning to avoid potential electrical shock. Before cleaning, please switch off the appliance off and remove the plug from the mains socket.
Exterior cleaning
To maintain good appearance of your appliance,you should clean it regularly.
Caution!
Interior cleaning
You should clean the appliance interior regularly. It will be easier to clean when food stocks are low. Wipe the inside of the fridge freezer with a weak solution of bicarbonate of soda, and then rinse with warm water using a wrung-out sponge or cloth. Wipe completely dry before putting the shelves and baskets back.
Thoroughly dry all surfaces and removable parts.
Although this appliance automatically defrosts, a layer of frost may occur on the freezer compartment's interior walls if the freezer door is opened frequently or kept open too long. If the frost is too thick, choose a time when the supply of food stocks are low and proceed as follows:
Caution! Don't use sharp objects to remove frost from the freezer compartment. Only after the interior is completely dry should the appliance be switched back on and plugged back into the mains socket.
Door seals cleaning
Take care to keep door seals clean. Sticky food and drinks can cause seals to stick to the cabinet and tear when you open the door. Wash seal with a mild detergent and warm water. Rinse and dry it thoroughly after cleaning.
Caution! Only after the door seals are completely dry should the appliance be powered on.
Replacing the LED light:
Warning! The LED light must not be replaced by the user! If the LED light is damaged, contact the customer helpline for assistance. To replace the LED light, the below steps can be followed:
If you experience a problem with your appliance or are concerned that the appliance is not functioning correctly, you can carry out some easy checks before calling for service, please see below.
Warning! Don't try to repair the appliance yourself. If the problem persists after you have made the checks mentioned below, contact a qualified electrician, authorized service engineer or the shop where you purchased the product.
| Problem | Possible cause & Solution |
|---|---|
|
Appliance is not working correctly |
Check whether the power cord is plugged into the power outlet properly. |
|
Check the fuse or circuit of your power supply.Replace if necessary. |
|
|
The ambient temperature is too low. Try setting the chamber temperature to a colder level to solve this problem. |
|
|
It is normal that the freezer is not operating during theautomatic defrost cycle, or for a short time after the appliance is switched on to protect the compressor. |
|
| Odours from the compartments |
The interior may need to be cleaned |
|
Some food, containers or wrapping cause odours. |
|
| Noise from the appliance |
The sounds below are quite normal:
|
|
Other unusual noises are due to the reasons below and may need you to check and take action:
|
|
| The motor runs continuously |
It is normal to frequently hear the sound of the motor, it will need to run more when in following circumstances:
|
| A layer of frost occurs in the compartment |
Check that the air outlets are not blocked by food and ensure food is placed within the appliance to allow sufficient ventilation.Ensure that door is fully closed.To remove the frosst,plerse refer to cleaning and care chapter. |
| Temperature inside is too warm |
You may have left the doors open too long or too frequently; or the doors are kept open by some obstacle; or the appliance is located with insufficient clearance at the sides, back and top. |
| Temperature inside is too cold |
Increase the temperature by following the "Display controls” chapter. |
| Doors can't be closed easily |
Check whether the top of the refrigerator is tilted back by 10-15mm to allow the doors to self close,or if something inside. is preventing the doors from closing. |
| Water drips on the floor |
The water pan (located at the rear bottom of the cabinet) may not be properly leveled, or the draining spout (located underneath the top of the compressor depot) may not be properly positioned to direct water into this pan, or the water spout is blocked. You may need to pull the refrigerator away from the wall to check the pan and spout. |
| The light is not working |
|