Loading ...
Loading ...
Loading ...
8
Reversing the Door Swing
If you find the direction of opening the door for either of the model series SBC58B or SBC56G (excluding
“CSS” and “IF” models) inconvenient, you can change it. Holes on the opposite side have already been
prepared at the factory.
This appliance can be opened from either the right side or the left. By default, the door hinge is on the
right side. If you prefer it on the left, please follow the appropriate instructions:
For SBC58B models:
1. Take off the upper hinge cover from the door and remove the screws that hold the top hinge.
2. Lift the hinge straight up to free the hinge pin from the socket in the top of the door.
3. Lift the door up and away to free its bottom socket from the hinge pin.
4. Remove the screws to the bottom hinge.
5. Remove the decorative caps from the opposite side and plug the holes from the original side with the
decorative caps.
6. Move the bottom hinge to the opposite side and tighten the screws. Use any lock washers or nuts if
they were installed in the original installation.
7. Replace door onto the hinge pin on the bottom hinge. Place top hinge pin into door. Insert screws into
the top hinge and tighten.
If you notice the door not hanging straight, loosen the top hinge screws, adjust the door until it is level
and tighten the screws.
Loading ...
Loading ...
Loading ...