Loading ...
Loading ...
Loading ...
6
Quick Steps
Dishwasher Use
Prepare and Load the Dishwasher
IMPORTANT: Remove leftover food, bones, toothpicks and other
hard items from the dishes. Remove labels from containers before
washing.
■ Make sure that when the dishwasher door is closed no items
are blocking the detergent dispenser.
■ Items should be loaded with soiled surfaces facing down and
angled toward the spray. This will improve cleaning and drying
results.
■ Avoid overlapping items like bowls or plates that may trap food.
■ Place plastics, small plates and glasses in the upper rack.
Wash only plastic items marked “dishwasher safe.”
■ To avoid thumping/clattering noises during operation: Load
dishes so they do not touch one another. Make sure lightweight
load items are secured in the racks.
■ Improper loading can cause dishes to be chipped or damaged.
When loading glasses or mugs, it is best to load these items in
between rows of tines instead of loading them over tines, as
shown.
1
Prepare and load
dishwasher.
Spin the spray
arms. They
should turn
freely.
3
Select a cycle and option (cycles and options vary
by model.)
2
Add detergent
and rinse aid.
4
Start dishwasher.
NOTE: Push door firmly closed within
3 seconds of pressing START/
RESUME. If door is not closed within
3 seconds, the Start indicator will
flash, an audible tone will be heard,
and the cycle will not start.
STEP 1
10 place load - upper rack 10 place load - lower rack
12 place load - upper rack 12 place load - lower rack
■ Make sure nothing keeps spray arm(s) from
spinning freely. It is important for the water
spray to reach all soiled surfaces.
■ When loading silverware, always place sharp items pointing
down. Mix items in each section of the basket with some
pointing up and some down to avoid nesting. Spray cannot
reach nested items.
Loading ...
Loading ...
Loading ...