Loading ...
Loading ...
Loading ...
3
4
5
Set the main unit in place
Tighten the rotary ring gently
but not very tightly
to complete the procedure
Use a coin or something
similar (slot into rear indent
of accessory) and tighten
gently.
Note that it will be impossible to
tighten it correctly in Step #5 as
excessive turning prevent tightening.
*
Same for both
W23 (white) and
M24 (gray)
Slip the rotary ring into the faucet.
In anti-clockwise direction, tighten
the attachment with washer intact.
Turn the rotary ring so that it is face
upward, and then tighten/position
to fit nicely onto main unit ring
3
Slip the rotary ring into the faucet.
In anti-clockwise direction, tighten
the attachment with washer intact.
Turn the rotary ring so that it is face
upward, and then tighten/position
to fit nicely onto main unit ring
3
Insert the rubber washer, turn the
rotary ring once on the main unit’s
ring portion, tighten gently.
4
Firmly press the unit onto the
bottom of the faucet and tighten the
screws. Make sure that the faucet is
located in the center of the screw
stopper ring
5
Tighten the rotary ring
tightly to complete the
procedure
Loading ...
Loading ...
Loading ...