Loading ...
Loading ...
Loading ...
13. Specifications and Performance
NSF/ANSI Standard 42 – Aesthetic Effects
Substance
Influent Challenge
Concentration
Overall Percent
Reduction
Reduction
Requirement
Chlorine 2.0 mg/L + /-10 % 95.8 %
≥
50 %
NSF/ANSI Standard 53 – Health Effects
Substance
Influent Challenge
Concentration
Overall Percent
Reduction
Reduction Requirement
Cysts minimum 50,000/L > 99.99 % 99.95 %
Substance
Influent Challenge
Concentration
Overall Percent
Reduction
Maximum permissible product
water concentration
Turbidity 11 ± 1 NTU 99.1 % 0.5 NTU
Maintenance according to the manufacturer’s instructions is critical for proper filter performance.
Filter life should not exceed 900 liters. If filtering time is notably increased, replace
the filter earlier.
This system has been tested according to NSF/ANSI 42 and 53 standards by NSF International
for reduction of the substances listed above. The concentration of the indicated substances in water
entering the system was reduces to a concentration less than or equal to the permissible limit for water
leaving the system, as specified in NSF/ANSI 42 and 53.
The system conforms to NSF/ANSI 42 and 53 for specific performance claims as verified and
substantiated by test data. While testing was performed under standard laboratory conditions,
actual performance may vary.
The use of this system shall comply with applicable state and local laws.
Water pressure (min/max): 70 kPa / 350 kPa. Capacity: 900 liters.
Service flow rate: 1.6 l/min.
Filtered water temperature (min/max): 1 °C /35 °C Electrical requirements: none.
Replacement Cartridge: CBC03E
Model # CB013E, CB073E
Model # CB013E, CB073E
Loading ...