Loading ...
Loading ...
Loading ...
20
REMOVE THE FREEZER DOOR
Remove the freezer door top hinge cover (if
equipped) by either squeezing it and pulling it up
or by prying it off with a plastic putty knife.
Remove the two 5/16” hex head screws, then lift
the hinge straight up to free the hinge pin.
Open the freezer door to 90.°
Installation Instructions
DISCONNECT THE POWER COUPLING
(on some models)
If the refrigerator has a water dispenser,
there is a power line (harness) from the cabinet
into the bottom hinge on the freezer door that
must be disconnected.
To disconnect, pull apart at the coupling.
4
Bottom
freezer
hinge
DISCONNECT THE ELECTRICAL
CONNECTORS (on some models)
If the refrigerator has a refreshment center,
there are electrical connectors (harnesses) from
the cabinet into the bottom hinge on the
refrigerator door
that must be disconnected.
To disconnect, pull apart each connector.
5
Bottom
refrigerator
hinge
CLOSE THE FREEZER AND
REFRIGERATOR DOORS
6
7
A
C
B
5/16” Hex Head
90°
MOVING THE REFRIGERATOR (CONT.)
Loading ...
Loading ...
Loading ...