Model: PMP20
QUICK GUIDE
MEGAPHONE/BULLHORN
Professional Compact Power Megaphone
This user manual contains important information for safe operation and optimal megaphone performance.
Please carefully read and follow safety notes and instructions. Save this manual for future reference.
Make sure that it is available to all persons using this device.
SAFETY
This megaphone is intended to be used only as described in this user manual. Any other use or use
under other operating conditions is considered to be improper and may result in personal injury or device
damage. Please use the megaphone as described and under supervision if used by children or minors.
• Ensure that plastic bags, packaging, etc.
• Never let children unattended use electrical devices.
• Use proper polarity is observed when inserting batteries.
• Incorrectlyinsertedbatteriesmaycausedamageandriskofre.
• Leaking batteries can cause permanent damage to the device.
• Remove batteries if the megaphone will not be used for long periods of time.
OPERATING INSTRUCTIONS
Voice Mode:
(1) Slide the switch on the rear of the megaphone to voice
(2) Adjust the desired volume level using the rear of the megaphone
Siren Mode:
(1) Slide the switch on the rear of the megaphone to siren
(2) Adjust the desired volume level using the rear slider switch
FEATURES & SPECIFICATIONS:
• For Indoor/Outdoor Use
• Power Output: 20 Watt Peak
• Voice Range: ¼ Mile Range
• Power Source: 4 x 1.5V - “C” Batteries
• 2 Audio Functions: Voice & Siren Modes:
Voice Mode:Ampliesyourvoiceasspoken
into the microphone
Siren Mode:Ampliesanalert/sirentone
through the megaphone speaker
• Ergonomic Pistol Grip and Light-Weight Chassis
• Dimensions: Diameter 5.4” x Length 8.6”
• Weight: 0.7 kg with cells and 0.53 kg without cell
BATTERY INSERTION
Press the button located near the back,
underside of the megaphone. The button
will release the lid to reveal the battery
compartment.
Please see correct battery direction
placement on the top side of the opening
battery compartment lid. Insert batteries,
close the cover and fasten clip until locked.
NOTE: Make sure the batteries are inserted
correctly observing correct polarity.