Loading ...
Loading ...
Loading ...
25
e left hinge side by
ith the 2
not be creased or crushed; otherwise there will be a
gap between it and the inside of the door.
o If the seal is not adhering to the cabinet properly, then you
d
e
r door.
r seal that are not adhering correctly. The heat
will make the seal more pliable and this will allow you to
e left hinge side by
ith the 2
not be creased or crushed; otherwise there will be a
gap between it and the inside of the door.
o If the seal is not adhering to the cabinet properly, then you
d
e
r door.
r seal that are not adhering correctly. The heat
will make the seal more pliable and this will allow you to
o
Insert the Support Rod into the Left
Lower Hinge hole of the door
er Hinge hole of the door
Left Lower Hinge
oo Install the door to th
tightening the Support Rod w
screws.
Install the door to th
tightening the Support Rod w
screws.
IMPORTANT: Check that the door opens and shuts correctly,
without fouling, after you have completed the door reversal
process.
After the door has been reversed, you should check
the door seal of the wine cabinet. The seal should
IMPORTANT: Check that the door opens and shuts correctly,
without fouling, after you have completed the door reversal
process.
After the door has been reversed, you should check
the door seal of the wine cabinet. The seal should
o The seal must adhere properly all the way around the door.
o The seal must adhere properly all the way around the door.
shoul
a) Us
adhe
shoul
a) Us
adhe
either:-
a warm damp cloth and manipulate the seal until it does
e to the cabinet properly, all the way around the
either:-
a warm damp cloth and manipulate the seal until it does
e to the cabinet properly, all the way around the
or or
b) Use a hair dryer on its lowest heat setting and lightly heat the
areas of the doo
b) Use a hair dryer on its lowest heat setting and lightly heat the
areas of the doo
manipulate the seal into the correct position. manipulate the seal into the correct position.
Support Rod
Screws
Loading ...
Loading ...
Loading ...