Loading ...
Loading ...
Loading ...
Guidelines for storage at high humidity for ... 32 °F
(0 °C)
Blueberries up to 9 days
Raspberries up to 3 days
Red currants up to 7 days
Cherries, sweet up to 14 days
Kiwi up to 80 days
Peaches up to 13 days
Plums up to 20 days
Cranberries up to 60 days
Rhubarb up to 13 days
Gooseberries up to 13 days
Grapes up to 29 days
5.7 Setting the temperature
The temperature is set automatically to just above 32 °F
(0 °C).
You can adjust the temperature slightly higher or lower.
The temperature can be adjusted from b1 (coldest) to b9
(warmest). The default setting is b5. If you select a setting
between b1 and b4 the temperature may fall below
0 Umrechnung von ° C wurde noch nicht definiert! (0 ° C),
causing food to become slightly frozen.
u
To set a higher temperature: Press the Up adjustment
button
Fig. 2 (3)
until the temperature flashes in the
display. Release the button.
u
To set a lower temperature: Press the Down adjustment
button
Fig. 2 (4)
until the temperature flashes in the
display. Release the button.
w
The previous value is displayed on the temperature
display.
u
To change the temperature gradually: Press the button
briefly.
-or-
u
To change the temperature continuously: Hold the
button down.
w
The values b1 to b9 are displayed while the settings are
being changed.
w
The actual temperature is displayed about 5 seconds
after the last button has been pressed. The tempera-
ture slowly adjusts to the new value.
5.8 Adjusting humidity
The humidity in the appliance can be adjusted depending
on the food to be stored.
With the dry setting, a dry climate is created that is suit-
able for storing packaged foods (dairy products, meat,
fish, and sausage). The appliance consumes less energy
In this operating mode.
With the hydro setting, a humid climate is created that is
suitable for storing loose-leaf lettuce, vegetables and fruit
with a high moisture content. When the drawers are full,
this creates a cool, fresh environment with an air humidity
of up to 90 %.
The humidity level in the compartment depends on the
moisture content of the food inside and on how often the
compartment is opened. The default setting is dry.
u
To set hydro: Press and hold
the dry/hydro button
(4)
until the
symbol is shown. Release
the button.
w
The dry/hydro symbol
(5)
lights
up.
u
To set dry: Press and hold the
dry/hydro button
(4)
until the
symbol goes out. Release the
button.
Fig. 3
5.9 Drawers
Fig. 4
u
In order to remove the drawers with a door opening
angle of 90°:
u
Press the drawers to the side slightly when pulling them
out, and then remove them from above.
Fig. 5
u
The vegetable drawer in the bottom recess can be used
to store small items that are not needed very often.
u
To store food to be refrigerated directly on the shelves:
pull the drawer forward and lift it out.
Operation
8 * Depending on model and options
Loading ...
Loading ...
Loading ...