Loading ...
Loading ...
Loading ...
12
Delay
Parametric EQ
EQ On/Off
EQ Frequency Hz
EQ-Q
EQ Gain +/-dB
Delay is shown in Milliseconds, Feet and Meters. You can
make an entry in any of the three fields and the other fields
will be calculated automatically.
The minimum delay is .01 milliseconds, the maximum delay
is 12 milliseconds.
This function is useful when compensating for distance
between satellites and subwoofers for instance.
All Sonance DSP amplifier models feature a 10 band
parametric EQ. Adjustments made to the EQ will be displayed
on the Output Frequency Response graph. We strongly
suggest not adjusting the EQ without proper measurement
equipment.
Turns each of the 10 parametric EQ filters on and off.
Enter the center frequency (20Hz - 20kHz) for the filter to
be adjusted.
This setting determines the width of the adjustment range.
The lower the number the wider the bandwidth. The higher
the number the narrower the bandwidth.
The level of each parametric adjustment can be set +/-12dB.
Careful adjustment of the EQ Gain is necessary to prevent
damage to the speakers. Always increase the level as little
as possible. The first choice should always be to reduce the
output to achieve the target frequency response.
Import Single Preset
Copy Preset
1. Import speaker preset to a location on your computer.
This can be accomplished by saving a DSP preset
downloaded from Sonance website.
2. Select the location you would like to store the new
preset using the SELECT PRESET TO EDIT pull down menu.
You can save the new preset in any of the open preset locations
or you can overwrite an existing preset you do not need.
3. Press the green IMPORT button.
4. From the pop-up menu choose local or internet.
5. You will be directed to MY COMPUTER (WINDOWS) or
FINDER (MAC).
6. Find & Select the new preset you would like to import (.eqs).
7. You will be directed to a screen that says Upload Successful.
8. Press “Click Here To Go Back”.
9. The preset will now be saved in the location you selected.
NOTE: PRESETS DOWNLOADED FROM INTERNET CAN
TAKE UP TO 15 SECONDS TO DOWNLOAD.
From / To the blue pull down menus allow you to pull a
preset from one location and assign it to another location.
Press green copy button to activate.
Output Frequency Response
This graph reflects the changes made below.
The above EQ image shows EQ4 ON at 500Hz, the Q is set
to 3 with a -6dB gain, creating a gradual dip in the lower
midrange.
EQ9 shows ON at 3000Hz, the Q is set to 10 with a -6dB
gain, creating a sharp dip in the midrange.
EQ10 shows ON at 10000Hz, the Q is set to 1 with a +4dB
gain, creating a very gradual slope in the high frequencies.
Loading ...
Loading ...
Loading ...