Loading ...
Loading ...
Loading ...
1. VACUUM ASSEMBLY
5
A. Handle section
B. Cleaner body
C. Hose, cleaning tools and wands
D. Handle bolts and nuts packet
Remove all parts from carton and
identify each item shown.
Make sure all parts are located before
disposing of packing materials.
1.2 Remove bag door on cleaner body by
pushing down at top of door and pulling door
outward.
Switch (A) above bag door should be in OFF position.
1.3 Slide handle onto cleaner body.
1.4 Push bolts into holes on back of handle.
1.5 Place nuts in recessed areas on front of handle.
Hold each nut in place while tightening each bolt
securely with a Phillips screwdriver.
1.6 Reposition bag door by fitting tabs on bottom
of door into opening. Press top of door to snap
securely shut.
1.7 Position cord on back of cleaner as shown and
press cord into clip.
ATTACH HANDLE
CARTON CONTENTS
1.1
A
B
C
D
1.3
1.4
1.5
1.6 1.7
1.2
Loading ...
Loading ...
Loading ...