PACKAGE CONTENTS
• Bluetooth Noise-Reduction Headphones • USB charging cable • Quick Setup Guide
• Two additional pairs of earbuds in small and large sizes • 3.5 mm-to-Micro-USB audio cable
FIND YOUR USER GUIDE ONLINE!
Go to www.insigniaproducts.com, enter your model in the search box, then press ENTER. Next to Features, click Support & Downloads,
then next to User Guide, click the language you want.
FEATURES
• Noise reducing
• Ambient noise monitoring
• Volume control
• Listen to music or talk on the phone wirelessly
• Music playback: 8 hours
Before using your new product, please read these instructions to prevent any damage.
QUICK SETUP GUIDE
Bluetooth Noise-Reduction
Headphones
NS-CAHBTEBNC-B
BLUETOOTH AND NOISE CANCELLING BASIC INDICATION
ACTION
Power on
Power o
Pairing mode
Volume Up/Down
Incoming call
Answer call
Reject call
Redial
Reset device list
Noise cancelling on
Noise cancelling o
Monitor on
Monitor o
OPERATION
Press and hold (power button) more than two seconds
Press and hold (power button) more than three seconds
Press and hold (pairing button) more than four seconds in
power o mode
Press and release / button
Press and release (talk button) when a call is incoming
Press and hold (talk button) when a call is incoming
Double press (talk button)
Long press (power button) more than ve seconds
Slide the noise cancelling switch to the noise cancelling on
position
Slide the noise cancelling switch to the noise cancelling o
position
Press and release monitor button to enter the monitor mode
Press and release monitor button to exit the monitor mode
LED INDICATION
Blue LED lights for 1.5 seconds
Red LED lights for 1.5 seconds
Blue and red LED blinking alternately
LED o
LED o
LED o
LED o
LED o
LED o
Green LED light on
Green LED turn down
Green LED ashes one time per three seconds
Green LED light on
SOUND
“power on”
“power o”
Two short beeps
Two high beeps for
maximum volume
Rings and vibrates
every two seconds
One long beep
Two long beeps
Two short beeps
Vibrates for two
seconds
CHARGING YOUR STEREO HEADPHONES
• When the red indicator LED blinks three times every minute and the voice prompt says “battery low”, the battery is low. To charge the battery, plug
the charging cable into your computer and into the micro USB port on your headphones. The red LED turns on to indicate that the battery is
charging and turns o when fully charged.
USING WITH THE 3.5 MM AUDIO CABLE
You can use your headset with non-Bluetooth enabled devices or on airplanes (in which the use of Bluetooth may be restricted) by taking advantage
of the headset’s audio jack.
• Connect the micro USB end of the included audio cable to the headset’s audio jack and the 3.5 mm end to the audio device’s headphone jack.
Notes:
• Corded operation does not require battery power for music listening. The microphone and the FullSound digital sound enhancement will not work via the audio cable.
• Finish your call before connecting the audio jack, as this will switch o battery power and cut an ongoing call.
USING YOUR STEREO HEADPHONES
Turning your stereo headphones on and o
1 Place the headphones around your neck.
2 Press and hold (power button) more than two seconds. The LED blinks blue (when turned on) or red (when turned o) and the voice prompt
says “Power on” or “Power o ”.
PAIRING YOUR STEREO HEADPHONES
Notes:
• Range is 33 feet (10 meters) • Prompts you by saying “Your device is connected,” when connected
• Supports easy pairing • Supports a battery indicator icon on an iOS device
Pairing with a cell phone or MP3 player
1 With your stereo headphones turned o, press and hold (pairing button) for four seconds. The blue and red LEDs blink alternately.
2 On your phone or MP3 player, select INSIGNIA NS-CAHBTEBNC-B from the list of discovered devices, then enter the password 0000 (four zeros)
(if required) to pair your headphones.
For more information on pairing Bluetooth devices to your cell phone or MP3 player, see the device’s documentation.
Note: After the headphones have been successfully paired with the cell phone or MP3 player, the headphones will automatically reconnect to the phone or MP3 player.
• Echo cancellation and noise suppression
• Voice prompts and easy pairing
• High quality sound
• Vibration prompt for incoming calls
# DESCRIPTION
1 Indicator LED
2 (Talk/Play/
Pause) button
3 Micro USB port
4 Volume Up /
Next Track
5 (Power/
Pairing) button
6 Volume Down /
Previous Track
7 Retraction buttons
8 Earbuds
9 Microphone
10 Indicator LED
11 Noise cancelling
12 Monitor button
13 Monitor
microphone
FUNCTION
Shows current Bluetooth status of the headphones.
If you receive a phone call, press to talk.
Plug the micro USB connector into this port to charge your
headphones.
Press to increase the volume.
Press and hold for one second to skip to the next track.
Press to turn on your stereo headphones.
Press to pair your headphones with a Bluetooth enabled
device.
Press to decrease the volume.
Press and hold for one second to skip to the previous
track.
Press to retract the cord.
Allow the headphones to t comfortably in your ear.
Allows you to talk on the telephone.
Shows current noise cancelling status of the headphones.
Cancel low frequency noise.
Press to start ambient noise monitoring.
Pick up the ambient low frequency noise.
Loading ...
Loading ...
Loading ...
