Loading ...
Loading ...
Loading ...
3
4
MODEL: NH11-17-TI MODEL: NH11-17-TI
Features
1
2
3
5
4
7
6
8
1. Lid
2. Automatic shut-o for added safety, the
kettle automatically shuts itself o once
the water has reached a boil
3. Cord wraps under the base for easy
storage
4. 360º swivel base – Return the kettle to its
power source from any direction
5. Tea Infuser
6. Stay-cool handle
7. Power button
8. Lid release button
Operating Instructions
FIRST TIME USE
1. Pull out the power cord from the compartment under the base, and place base on
a at surface.
2. Open the lid then ll water into the kettle.
3. Fill kettle to the maximum level mark (for rst time use only) with fresh tap water.
4. Close the lid and place the kettle back on the base unit, and plug into a power
outlet.
5. Switch the kettle on by pressing the switch to the "I" position, the blue LED light
inside the glass jar will illuminate to indicate the water is heating.
6. The kettle will automatically switch to the "O" position once the water has boiled
and the blue LED indicator light has gone o.
NOTE: Wait 30–60 seconds if you need to heat the water immediately after a
boiling cycle.
7. Empty the kettle then wash the glass jar with water, repeat the above
2 times.
NOTE: Never allow the water to ll above the maximum level or lower than the
minimum level indicated on the glass jar.
MAKING TEA
1. Remove tea infuser from kettle by grasping the tea infuser insert and lifting up.
2. Add fresh, cold water to the kettle, lling it for the number of cups of tea you wish
to make—up to 4 cups (max ll for tea is 1 Liter).
3. Insert tea infuser into the kettle and ensure it is securely in place.
4. Once water has boiled, open lid and carefully add tea leaves or tea bags to the
tea infuser. Securely close the lid. Warning: Use extreme caution when adding tea
leaves, unit is very hot.
5. Caution: Wait until unit has completely cooled before removing tea infuser.
Tea infuser will be very hot after use; may cause serious burns if not handled
properly.
GENERAL USE
For everyday use follow steps 1-6 listed above to ensure best results.
NOTE: The power source will only work if the kettle is placed directly on the
base unit.
Loading ...
Loading ...
Loading ...