Loading ...
Loading ...
Loading ...
EN
51
• Never use bleach or chlorine products as these
could permanently damage of the stainless steel.
• Do not use steel wool.
To clean the inside of the NutriCook
• Clean it with a scouring pad and washing up liquid.
• If the inside of the stainless steel cooker shows
iridescent reflections, or white spots left by hard water,
clean with a solution of equal parts water and vinegar.
Leave for 10 minutes. Rinse and dry completely.
• You can wash the NutriCook pan in the dishwasher.
To clean the outside of the NutriCook
• Clean it with a sponge and washing up liquid.
• For tough staining on the outside of NutriCook use
a special stainless steel polisher and cleanser from
a hardware store.
To clean the NutriCook lid
• Remove the timer.
• Clean the lid with a sponge and washing up liquid.
• You can wash the lid in the dishwasher after first
removing the timer, the control module and the seal.
• If the decorative crown (G) becomes discoloured
by food (carrots, oranges…), rub it with a cloth
dipped in a little cooking oil, then rinse it.
• To clean the steam release valve: remove the
control module and clean the lid under running
water. Visually check that the operating valve outlet
is not blocked by holding it up to the light.
Fig 14
• If you accidentally remove the base of the
automatic air removal system, refit it by pressing
and turning it simultaneously.
To clean the lid seal
• After using the NutriCook, always
clean the seal (H) and its groove.
• Wash the seal using a sponge
and washing up liquid.
• To refit the lid seal, refer to the
drawing
Fig. 15 and ensure that
the words "face côté couvercle" are
against the lid.
Never place the
timer under
running water or in
the dishwasher.
Automatic air
release system base
Never wash the seal in the dishwasher.
Loading ...
Loading ...
Loading ...