Loading ...
Loading ...
Loading ...
12
EN
Using a drain hose (continuous drainage)
When using a drain hose, the collected water is drained out of the drain
hose outlet (Q). No water is collected in the water tank (O).
NOTICE
The drain hose outlet (Q) has no pump. The connected
hose must be sloping downwards.
• Open the drain hose outlet (Q) by turning it in a counter-clockwise
direction.
• Connect a hose by using a 1" (2.54 cm) female connector
(both separately purchased).
• Place the end of the drain hose at a suitable drain.
Using the drain pump outlet (continuous drainage)
NOTICE
Risk of damage! Insert the drain hose (U)
at least (0.59") 15 mm into the pump drain
hose outlet (S).
Risk of damage! Do not use this function
when the outdoor temperature is ≤32ºF
(0°C). The water in the hose may freeze
and block it.
The drain pump starts its work, when the
water tank is fi lled at 1/3 of its volume.
Do not exceed the drain hose height of
≤16' (5 m).
• If installed, remove the drain hose from the drain hose outlet (Q) and
close it.
• Firmly press the 1/4" (6.4 mm) drain hose (U) to the pump drain hose
outlet (S).
• Place the end of the drain hose (U) at a suitable drain.
≤16' (5 m)
Loading ...
Loading ...
Loading ...