Loading ...
Loading ...
Loading ...
57
Remote Control
qd RESET Press to reset the settings to the factory defaults. See pages 92
and 95. Also used to clear Label Channels.
qf (Twin View) Press to turn on and off Twin View. For details, see page 69.
qg POWER Press to turn on and off the TV.
qh TV/VIDEO Press repeatedly to cycle through the video equipments
connected to the TV’s video inputs.
qj DISPLAY Press once to display the current channel number, and channel
label. If set, the current channel number will display for 10
seconds.
qk 0 - 9 ENT Press 0 - 9 to select a channel; the channel changes after 2
seconds. Press ENT to change channels immediately.
ql MENU Press to display the menu. Press again to exit from the menu.
For details, see page 91.
w; V/v/B/b Press V/v/B/b to move the on-screen cursor. To select an item,
press .
wa F1 Press to select the function of your video equipment which is
programmed on the TV’s remote control.
When FUNCTION is switched on TV
Press to display the Memory Stick menu. For more details, see
“Using the Memory Stick Viewer” on page 75.
ws F2 Press to select the function of your video equipment which is
programmed on the TV’s remote control.
wd ANT Press to switch between the sources connected to the TV’s
VHF/UHF and CABLE inputs.
When FUNCTION is switched on SAT/CABLE
GUIDE Press to display the program guide of your satellite program
provider.
wf Press to select the sound effect modes: TruSurround,
Simulated, Off. The sound effect modes can be also accessed
in the Audio menu. For more details, see “Selecting Audio
Options” on page 95.
When FUNCTION is switched on SAT/CABLE
TV/SAT Press to switch between the TV and the satellite receiver.
wg CH +/– Press to scan through channels. To scan quickly through
channels, press and hold down either CH.
wh JUMP Press to jump back and forth between two channels. The TV
alternates between the current channel and the last channel
that was selected.
wj MTS/SAP Press repeatedly to cycle through the Multi-channel TV Sound
(MTS) options: Stereo, Auto SAP (Second Audio Program),
and Mono. The MTS setting can be also accessed in the Audio
menu. For more details, see “Selecting Audio Options” on
page 95.
Button Description
Loading ...
Loading ...
Loading ...