Loading ...
Loading ...
Loading ...
– If a maximum number of parking at-
tempts or the time taken for parking is
exceeded.
– If the PDC Park Distance Control dis-
plays clearances that are too small.
– When switching into other functions of
the radio.
A Check Control message is displayed.
Resuming
An interrupted parking operation can be
continued, if needed.
Reactivate the parking assistant, refer to
page 196, and follow the instructions on the
Control Display.
Switching off
The system can be switched off as follows:
– Press the park assistance button.
– Switching off the ignition.
System limits
Safety information
Warning
The system is designed to operate in cer-
tain conditions and circumstances. Due to
conditions or other factors, the system
may not respond. There may be a risk of
accident or risk of damage to property. Ac-
tively intervene as warranted. Refer to the
information in this Owner’s Manual re-
garding the scope of the system’s opera-
tion and limitations.
No parking assistance
The parking assistant does not offer assis-
tance in the following situations:
– In tight curves.
Functional limitations
The system may be limited in the following
situations:
– On bumpy road surfaces such as gravel
roads.
– On slippery ground.
– With accumulations of leaves/snow in
the parking space.
– With a mounted emergency wheel.
– With ditches or edges, for instance an
edge of a port.
Limits of ultrasonic measurement
The detection of objects with ultrasonic
measurements can run into physical limits,
for instance under the following conditions:
– For small children and animals.
– For persons with certain clothing, for in-
stance coats.
– With external interference of the ultra-
sound, for instance from passing vehi-
cles or loud machines.
– When sensors are dirty, iced over, dam-
aged or out of position.
– If cargo protrudes.
– Under certain weather conditions such
as high relative humidity, wet condi-
tions, snowfall, extreme heat, or strong
wind.
– With tow bars and trailer couplings of
other vehicles.
– With thin or wedge-shaped objects.
– With moving objects.
– With elevated, protruding objects such
as ledges or cargo.
– With objects with corners and sharp
edges.
– With objects with a fine surface struc-
ture such as fences.
– For objects with porous surfaces.
Seite 198
CONTROLS Driving comfort
198
Online Edition for Part no. 01405A2C1C9 - II/21
Loading ...
Loading ...
Loading ...