Loading ...
Loading ...
Loading ...
9/26 EN
Refrgerator / User Manual
3 Installaton
3.1. Appropriate
installation location
Contact an Authorized Service for the
installation of the product. In order to
prepare the product for use, refer the
information in the user manual and
ensure that electrical installation and
water installation are appropriate. If not,
call a qualified electrician and technician
to have any necessary arrangements
carried out.
B
WARNING: Manufacturer shall
not be held lable for damages that
may arse from procedures carred
out by unauthorzed persons.
B
WARNING: Product must not
be plugged n durng nstallaton.
Otherwse, there s the rsk of
death or serous njury!
A
WARNING: If the door clearance
of the room where the product
shall be place s so tght to prevent
passng of the product, remove
the door of the room and pass
the product through the door by
turnng t to ts sde; f ths does
not work, contact the authorzed
servce.
surface to prevent jolts.
away from heat sources such as hobs,
heater cores and stoves and at least 5
cm away from electrcal ovens.
drect sun lght and kept n humd
places.
provded around your product n order
to acheve an effcent operaton. If the
product s to be placed n a recess n
the wall, pay attenton to leave at least
5 cm dstance wth the celng and sde
walls.
where the temperature falls below
-5°C.
3.2. Installing the
plastic wedges
Plastc wedges suppled wth the
product are used to create the dstance
for the ar crculaton between the
product and the rear wall.
1. To nstall the wedges, remove the
screws on the product and use the
screws suppled together wth the
wedges.
2. Insert the 2 plastc wedges onto the
rear ventlaton cover as llustrated n
the fgure.
Loading ...
Loading ...
Loading ...