Loading ...
Loading ...
Loading ...
USB Update
Self Diagnosis
Update software using an update file on a USB device.
1
Save the update file (in .bin format) that you downloaded from the Samsung Electronics website
(http://www.samsung.com/sec) to a USB device.
2
Connect the USB device to the SERVICE port ( ) on the monitor.
Select → → .Support Software Update
3
Follow the instructions on the screen to proceed with update.
4
Your product will turn itself off and on again automatically after completing update, and then turn
off your product.
5
Remove the power cord from the power outlet and then reconnect the cord after turning off.
―
To perform software update by using a USB device, first format the USB device to FAT32.
―
When updating by a USB device, be sure to use the device whose version of USB 3.0 or lower.
―
When performing update, make sure that only one BIN file ( .bin) is saved in the root directory.
―
If the message is displayed, this is probably due to No USB devices detected. Please check and try again.
the following reasons.
―
A USB device is not connected to the SERVICE port ( ).
―
The files in the connected USB device are not compatible formats.
―
There are no valid update files found in the connected USB device. (There are no update files saved in
the memory or the file names are incorrect.)
OK
The test screen will now be shown.
Please look carefully at the screen for the next 5 seconds.
FreeSync Premium
60Hz
Display
Color
User Setup
Input
Gaming Setup
Picture
Color
1920*1080
Game
Source
System
Language
OnScreen Display
Sound
Reset All
USB Update
Self Diagnosis
1
Use the Function Key Guide and go to → → .System Self Diagnosis
2
Select when the following screen is prompted.OK
• Review the test screen.
―
Never turn off the power nor change the input source during self diagnosis. If possible, try not to interrupt
testing.
25
Loading ...
Loading ...
Loading ...