Loading ...
Loading ...
Loading ...
3A. Screw the by-pass screws (3) of all gas taps completely in by using
the flat-blade screwdriver (T2).
3B. Remove the by-pass screws by using the flat-blade screwdriver (T2)
and the nose pliers (T3). Place the new by-pass screws with the
nose pliers and screw the by-pass screws of all gas taps completely
in, by using the flat-blade screwdriver.
B2
B1
3
Check for gas tightness and operation
3. Spray leak test spray over all gas connections and check for gas
tightness.
4. Repeat for every burner.
Loading ...
Loading ...
Loading ...