Loading ...
Loading ...
Loading ...
Safety regulations
• This appliance should only be connected by a registered installer.
• Prior to installation, ensure that the local distribution conditions (voltage, frequency,
nature of the gas and gas pressure) and the adjustment of the appliance are
compatible.
• This Appliance must be earthed.
• The voltage, frequency, power, type of gas and the country for which the appliance
has been designed are shown on the appliance rating plate.
• Electrical connection Class I - 220-240 V - 50/60 Hz - max 1 W
The electrical connection must comply with national and local regulations.
• The wall plug socket and plug should always be accessible.
• If a stationary appliance is not fitted with a supply cord and a plug, or with other
means for disconnection from the supply mains having a contact separation in all
poles that provide full disconnection under overvoltage category III conditions, the
means for disconnection must be incorporated in the fixed wiring in accordance with
the wiring rules. Using an omnipolar switch with a contact separation of at least
3 mm fitted in the supply cable will fulfil this requirement.
• The connection cable must hang freely and should not be fed through a drawer.
• Gas connection 1/2” ISO 228 / ISO 7-1 / EN 10226-1 (1/2” ISO 228 / 1/2” ISO 228
FR only).
The gas connection must comply with national and local regulations. See appliance
label for technical gas data.
• This appliance is not connected to a combustion products evacuation device. It
shall be installed and connected in accordance with current installation regulations.
Particular attention shall be given to the relevant requirements regarding ventilation.
• We recommend that the gas hob be connected by means of a fixed pipe. Connection
using a specially designed safety hose is also permitted.
• The pipe behind the oven must be made entirely out of metal.
• A safety hose may not be bent and must not come into contact with moving parts of
kitchen units.
• The gas supply valve must always be placed in an easily accessible position.
• The worktop into which the hob is fitted should be flat.
• The walls and the worktop surrounding the appliance must be heat resistant up to at
least 85 °C. Even though the appliance itself does not get hot, the heat of a hot pan
could discolour or deform the wall.
Service
• Faulty parts may only be replaced by original parts. The manufacturer can only
guarantee that original parts meet safety requirements.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
Loading ...
Loading ...
Loading ...