Loading ...
TROUBLESHOOTING
My shredder isn’t working
• Make sure that the power cord is plugged into a working power
outlet. If the power cord is damaged, replace it.
• Make sure that the shredder head and wastebasket are positioned
correctly.
• If the Overheat indicator is on, let it cool at least 30 minutes. When
the indicator is o, you can use your shredder again,
• Change the position of the paper as you insert it.
• The paper may be too thin or crumpled for your shredder to
recognize it. Fold the paper, then reinsert it.
• Slide the switch to FWD.
• Make sure that you only send 10 sheets of paper, one credit card,
or one disc through your shredder at a time.
My shredder is jammed
• Slide the switch to REV, remove the paper from the cutter, then
slide the switch to AUTO, and try again.
The cutter won’t stop
• Slide the switch to OFF, unplug your shredder from the power
outlet, then push the shredded paper down to make sure that it is
away from the shredder head.
• Slide the switch to REV to remove extra paper, disc, or credit card
from your shredder.
My shredder is too noisy
• Make sure that your shredder is on a at, level surface.
• Make sure that the shredder head and wastebasket are positioned
correctly.
The Overheat indicator is lit.
• Let your shredder cool at least 30 minutes. When the indicator
turns o, you can use your shredder again.
The Overload indicator is lit.
• Make sure that you haven’t put too much paper into your
shredder at one time. Slide the switch to REV, remove the paper
from the cutter, then try again with less paper.
SPECIFICATIONS
• Dimensions: 12.7 × 8.3 × 16.8 in.
(32.2 × 21.2 × 42.6 cm)
• Cutting style: Cross cut
• Entry width: 8.6 in. (22 cm)
• Shred capacity: 10 sheets (75 g/m2 A4 paper)
1 disc or credit card
• Shred size: .2 × 1.4 in. (4 × 35 mm)
• Shred speed: 3 m/1 min.
• Duty cycle: 3 mins ON / 30 mins OFF
• Input: AC 120 V, 60 Hz, 4.5 A
• Net weight: 12 lbs. (5.5 kg)
• Basket capacity: 5.6 gal (21 L)
LEGAL NOTICES
FCC statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Changes or modications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3(B)/NMB-3(B)
ONEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2020 Best Buy. All rights reserved.
V2 ENGLISH 20-0106
IMPORTANT SAFETY INFORMATION
Please read thoroughly
Before using the shredder, please read the guide and become familiar with the safety
information, operating instructions, and maintenance requirements. Following all warnings
and instructions in the guide and as marked on the shredder. Do not attempt to service this unit
by yourself. Doing so will void the manufacturer’s warranty and may expose you to sharp
cutting blades and/or high voltage electric shock that could cause serious injury. Any repairs
must be performed by qualied service personnel.
11. Keep in the OFF position when the shredder is not in use for prolonged periods of time.
12. Empty wastebasket frequently.
13. The document shredder must always be deactivated and disconnected from the electrical
line prior to moving, transporting and cleaning the device and prior to emptying the waste
basket.
14. The device may not be operated with a damaged power cord.
15. For indoor use only.
16. To protect the machine well, we suggest the user to operate it in this way: work 3 minutes
then rest 30 minutes.
17. The machine allowed max shred 10 sheets paper (75gsm) or 1 credit card
or 1 CD at one time.
18. The socket-outlet must be installed near the equipment and must be easily accessible
during use.
1. Read
instructions
before use
3. Avoid
touching the
document feed
opening with
hands
5. Product is not
intended for use
by children
(product is not
toy)
4. Do not spray or keep any
aerosol products in or around
shredder
2. Avoid loose
clothing or
jewelry touching
the document
feed opening
7. Shredder
oil only
6. Avoid
getting hair
near the
document
feed opening
8. Sharp edges,
do not touch
9. This equipment is not
intended for use by children.
Avoid touching the media feed
opening with the hands,
clothing or hair. Unplug this
equipment when not in use of
an extended period of time.
10. Warning!
Before switching
the machine on,
make sure that
you observe all
safety
instructions