Overheat Door open
PowerOverload
FWD REV
OFFAUTO
Switch
LED indicators
SETTING UP YOUR SHREDDER
1 Place the wastebasket upright on a level surface.
2 Attach the shredder head to the basket. Make sure that it
ts properly.
3 Place the wastebasket securely in the shredder.
Note: Do not use plastic bags to line the wastebasket.
4 Connect the power cord to a power outlet. Do not use an
extension cord.
USING YOUR SHREDDER
1 Unpack your shredder, then place it upright on a level
surface.
2 Make sure that the shredder head is correctly tted onto
the basket.
3 Plug the power cord into a standard (120 V AC) outlet. Do
not use an extension cord.
4 Slide the power switch to AUTO.
5 Insert paper (up to 10 pages) or one credit card or disc into
the shredding slot. Your shredder automatically shreds
what you insert.
Note: Don’t put envelopes, adhesive material, newsprint,
transparencies, laminated documents, continuous forms,
cardboard, or hard and plastic materials (except credit cards)
through the shredder. You can shred small staples and small
paper clips.
6 If the shredder jams, slide the switch to REV to return the
paper, then slide the switch to AUTO. The shredder can be
used again if the jam is cleared.
7 When the wastebasket is 2/3 full, slide the switch to OFF,
unplug the cord from the power outlet, then lift up and
empty the wastebasket.
PACKAGE CONTENTS
• Cross cut shredder with wastebasket
• Quick Setup Guide
FEATURES
• Shreds up to 10 sheets of paper at one time
• Destroys credit cards, compact discs, small staples, and
small paper clips
• Cross-cut size .2 × 1.4 in. (4 × 35 mm) protects sensitive
data
• 5.6 gal (21 L) capacity basket holds shredded waste and is
easy to empty
Before using your new product, please read these instructions to prevent any damage.
QUICK SETUP GUIDE
10-sheet Cross Cut
Shredder
NS-S10CCBK / NS-S10CCBK-C
# ITEM
1 Handle
2 Switch
3 LED
indicators
4 Shredding
slot
5 Window
6 Wastebasket
DESCRIPTION
Lets you easily lift up the shredder head
to empty the paper inside the waste
basket. Make sure that your shredder is
turned o before you move it.
FWD: Sends an item through your
shredder. The POWER indicator lights
green.
Note: When you slide the power switch to
FWD, the cutters run forward continuously.
To stop the cutters, you have to move the
switch to a dierent position.
We recommend that you only use FWD to
make sure that the remaining paper in slot
gets shredded or you want you clear the slot.
AUTO: Automatically shreds an item
when inserted into the shredding slot.
The POWER indicator lights green. After
shredding, the shredding stops
automatically.
OFF: Turns o your shredder.
REV: Reverses the paper in the slot to
clear a jam or remove unshredded paper.
Overheat: Lights when your shredder
has overheated. If this indicator is on, the
machine stops shredding, and recovers
when the indicator is o. The cool down
time is at least 30 minutes.
Overload: Lights when trying to shred
over the maximum 10 sheets or when
the paper is folded. In overload, the
cutter turns o automatically.
Power: Lights when your shredder is in
use.
Door open: Lights when the shredder
head is not on the wastebasket or when
the head is not in the correct position on
the wastebasket.
Insert up to 10 sheets of paper at a time
or one credit card or disc at a time.
Lets you see how much shredded
material is in the wastebasket.
Holds the paper, cards, and discs that
you have shredded. Empty the basket
when it is 2/3 full.
AUTO
REV
Loading ...
