Loading ...
Loading ...
Loading ...
- Only use the adapter and accessories supplied.
- Always put the protection cap on the shaver to prevent damage and to
avoid dirt accumulation in the shaving heads.
Compliance with standards
- The shaver complies with the internationally approved IEC safety
regulations and can be safely cleaned under the tap.
- The shaver complies with all standards regarding electromagnetic elds
(EMF). If handled properly and according to the instructions in this user
manual, they are safe to use based on scientic evidence available today.
General
- The appliance is equipped with an automatic voltage selector and is
suitable for mains voltages ranging from 100 to 240 volts.
- The adapter transforms 100-240 volts to a safe low voltage of less than
24 volts.
Using the shaver
Caution: This shaver is not rechargeable and can only be used from the
mains.
1 Put the small plug in the shaver.
2 Put the adapter in the wall socket.
3 Press the on/off button once to switch on the shaver.
4 Move the shaving heads over your skin. Make circular movements.
- Your skin may need 2 or 3 weeks to get accustomed to the Philips
shaving system.
5 Press the on/off button once to switch off the shaver.
6 Clean the shaver (see chapter ‘Cleaning and maintenance’).
Cleaning and maintenance
Never use compressed air, scouring pads, abrasive cleaning agents or
aggressive liquids such as petrol or acetone to clean the appliance.
- Clean the shaver after every shave for optimal shaving performance.
- Regular cleaning guarantees better shaving performance.
- For the best cleaning results, we advise you to use the Philips Cleaning
spray (HQ110).
- Be careful with hot water. Always check if the water is not too hot, to
prevent your hands from getting burnt.
Note: Water may leak from the socket at the bottom of the shaver when you
rinse it. This is normal and not dangerous because all electronics are enclosed
in a sealed power unit inside the shaver.
ENGLISH 7
Loading ...
Loading ...
Loading ...