Loading ...
Loading ...
Loading ...
21
4. Maintenance and care of the appliance
4.1 Overall cleaning
•
Dusts behind the refrigerator and on the ground shall be timely cleaned to improve the
cooling eect andenergy saving.
•
Check the door gasket regularly to make sure there are no debris. Clean the door gasket with
a soft cloth dampened with soapy water or diluted detergent.
•
The interior of the refrigerator should be cleaned regularly to avoid odor.
•
Please turn o the power before cleaning interior, remove
all foods, drinks ,shelves, drawers, etc.
•
Use a soft cloth or sponge to clean the inside of the
refrigerator, with two tablespoons of baking soda and
a quart of warm water. Then rinse with water and wipe
clean. After cleaning, open the door and let it dry naturally
before turning on the power.
•
For areas that are dicult to clean in the refrigerator (such
as narrow sandwiches, gaps or corners), it is recommended
to wipe them regularly with a soft rag, soft brush, etc.
and when necessary, combined with some auxiliary tools (such as thin sticks) to ensure no
contaminants or bacterials accumulation in these areas.
•
Do not use soap, detergent, scrub powder, spray cleaner, etc., as these may cause odors in
the interior of the refrigerator or contaminated food.
•
Clean the bottle frame, shelves and drawers with a soft cloth dampened with soapy water or
diluted detergent. Dry with a soft cloth or dry naturally.
•
Wipe the outer surface of the refrigerator with a soft cloth dampened with soapy water,
detergent, etc., and then wipe dry.
•
Do not use hard brushes, clean steel balls, wire brushes, abrasives (such as toothpastes),
organic solvents (such as alcohol, acetone, banana oil, etc.), boiling water, acid or alkaline
items, which may damage the fridge surface and interior. Boiling water and organic solvents
such as benzene may deform or damage plastic parts.
•
Do not rinse directly with water or other liquids during cleaning to avoid short circuits or
aect electrical insulation after immersion.
4.2 Cleaning of door tray
•
According to the direction arrow in the gure below,
use both hands to squeeze the tray, and push it
upward, then you can take it out.
•
After washing the tray having been taken out, you
can adjust its installing height in accordance with
your requirement.
Please unplug the refrigerator for defrost and cleaning.
Loading ...
Loading ...
Loading ...