Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
86
The Miele Waterproof system
As long as your dishwasher has been
installed correctly, the Miele waterproof
anti-leak system will protect you from
water damage.
Connection to the water supply
Water in the dishwasher must
not be used as drinking water.
– The dishwasher may be connected to
a cold or hot water supply, max.
60°C.
We would only recommend
connection to a hot water supply if it
is economical, e.g. a solar powered
supply. When connected to a hot
water supply, all programmes will be
carried out with hot water.
– The inlet hose is approx. 1.5m long.
– A tap with a 3/4" male thread must
be provided on site.
– IMPORTANT: Australia and New
Zealand
This appliance must be installed
according to AS/NZS 3500.1. Back
flow prevention is already integrated
in the appliance.
– The water pressure (flow pressure at
the take-off point) must be between
50 and 1000 kPa (0.5 and 10 bar). If
the water pressure is too high, a
pressure reducer valve must be fitted.
After connecting the dishwasher to
the water supply, check that all
plumbing connections are watertight.
To avoid any damage to the
appliance, the dishwasher must only
be operated when it is connected to
a fully vented plumbing system.
The inlet hose must not be
shortened or damaged in any way as
it contains electrical components
(see illustration).
Loading ...
Loading ...
Loading ...