Loading ...
Loading ...
Loading ...
Problem solving guide
75
Water inlet fault
Problem Possible cause and remedy
The / indicator
light flashes on and off.
The tap is turned off.
Turn on the tap fully.
The dishwasher stops
during a programme.
The /indicator
light is flashing.
The fault number or
appears in the
display.
Before rectifying the problem, you must:
Switch the dishwasher off with the button.
Water intake is restricted.
Turn on the tap fully and start the programme
again.
Clean the water inlet filter (see "Maintenance").
The water pressure at the intake is lower than
50kPa (0.5bar).
Seek professional advice.
Water drainage fault
Problem Possible cause and remedy
The dishwasher stops
during a programme.
The / indicator
light flashes.
Fault code appears
in the display.
Before rectifying the problem, you must:
Switch the dishwasher off with the button.
The water outlet is restricted.
There might be water in the wash cabinet.
Clean the filter combination (see “Cleaning and
care - Cleaning the filters”).
Clean the drain pump (see “Maintenance”).
Clean the non-return valve (see “Maintenance”).
Remove any kink or loop in the drain hose.
Loading ...
Loading ...
Loading ...