Loading ...
Loading ...
Loading ...
Setting up your first DSW-1H
Once you have placed your DSW-1H in your listening room and have downloaded the HEOS app, you are ready to configure your DSW-1H for music
playback. This involves following a few simple steps to get the DSW-1H connected to your existing home network:
Caution
0
DO NOT connect the Ethernet cable if you are connecting your DSW-1H to a wireless network. If you are connecting the DSW-1H to a wired network,
use an Ethernet cable to connect the DSW-1H to your network or router.
1
Make sure your mobile device is connected to your
wireless network (the same network you want your
DSW-1H connected to).
You can check this in the Settings - Wi-Fi menu of your iOS or
Android device.
NOTE
0
If your wireless network is secure, make sure you know the password to join
your network.
2
Make sure you have the included 1/8
inch (3.5 mm) setup cable handy.
3
Launch the HEOS app on your
mobile device.
4
Tap the “Setup Now” button at the top of the screen.
5
Follow the instructions to add the DSW-1H to your
wireless network.
The Wi-Fi settings from your mobile device will be copied to the
DSW-1H via the audio cable.
NOTE
0
If you have any problems connecting your HEOS device, jump to the
Troubleshooting section. (v p. 25)
Contents Setup Use Troubleshooting Status LED Appendix
15
Loading ...
Loading ...
Loading ...