Loading ...
Loading ...
Loading ...
22 EN
8 Troubleshooting
Warning
•
Never remove the casing of this apparatus.
Tokeepthewarrantyvalid,nevertrytorepair
the system yourself.
If you encounter problems when using this
apparatus,checkthefollowingpointsbefore
requestingservice.Iftheproblemremains
unsolved,gotothePhilipswebsite(www.philips.
com/welcome).WhenyoucontactPhilips,ensure
that the apparatus is nearby and the model
number and serial number are available.
No power
• Make sure that the AC power plug of the
device is connected properly.
• Make sure that there is power at the AC
outlet.
• Check whether the device is in Eco
standby mode (see 'Connect power and
switch on' on page 7).
No sound or poor sound
• Adjust volume on the Philips AirStudio+
Liteapp,AW2000,ortheexistingaudio
system connected to AW2000.
• Ifyouhaveselectedthewiredconnection,
check whether the Ethernet cable has
been connected properly and securely
(see 'Option 4: Set up wired connection
through an Ethernet cable' on page 15).
• Check the Wi-Fi network connection.
Set up the network again if needed (see
'Connect AW2000 to your home Wi-Fi
network' on page 9).
• If the audio source is an external audio
player,adjustvolumeontheaudioplayer
directly.
No response from the device
• RestartAW2000,andthensetupthe
Wi-Fi network for AW2000 again (see
'Connect AW2000 to your home Wi-Fi
network' on page 9).
• Disconnect and reconnect the AC power
plug,andthenswitchonthedeviceagain.
Wi-Fi network connection failed
• This device does not support the WPS-
PIN method.
• Enable SSID broadcast on the Wi-Fi router.
• Keep away from potential sources of
interferencewhichmayaffectWi-Fisignal,
such as microwave ovens.
• Make sure that the SSID name of your
home router consists of alphanumeric
characters,withnospaceorspecial
characterslike%/#/*/#inserted.The
network password should not consist of
#/:/;/'.
• If you choose to rename your AW2000
manually on the Philips AirStudio+ Lite
app,donotusespecialcharactersor
symbols.
• ForsomenewtypesofWi-Firouters,a
network name (SSID) may be created
automatically when you use WPS for
connection. Always change the default
network name (SSID) to a simple one that
consistsofalphanumericalcharacters,and
also change the Wi-Fi security mode to
secure your network.
Wired network connection failed
• Ifyouhavetriedwirelessconnection,
beforesetupofwiredconnection,you
need to reset AW2000. Follow the
procedures below to reset the device:
1 Unplug the power cord.
2 Hold the numeric key 1 and plug the
power cord again.
» Thepower/statusindicatorashes
amber,thenturnssolidamber,andafter
awhilestartstoashamberagain.
3 Release the numeric key 1.
Note
•
Do not release the numeric key 1 until the power/
statusindicatorashesamberforasecondtime.
Loading ...
Loading ...
Loading ...