Loading ...
Loading ...
Loading ...
Conventional Cruise Control
83
●Automatic cancellation by the system
In the following cases, a buzzer sounds a single long beep and the Cruise control function is
automatically canceled ( is displayed on the EyeSight display area.). After the condi-
tions listed below have been eliminated, perform the cruise control set operation again to
reactivate cruise control.
• The select lever was moved to a position other than .
The cruise control function can be used again after the lever is returned to the posi-
tion.
• A paddle shift switch was operated during
driving with the lever in the position.
The cruise control function can be used
again after the shift indicator returns to .
• Vehicle speed drops to approximately 20
MPH (30 km/h) or less (due to a steep uphill
grade or some other reason).
• When the Vehicle Dynamics Control is in the OFF mode
- The function can be resumed after Vehicle Dynamics Control has been switched to the
normal mode or traction mode.
• Vehicle speed rises to approximately 100 MPH (160 km/h) or more.
• The ABS, Vehicle Dynamics Control or Traction Control functions activate.
• Any door (except the rear gate/trunk) was opened.
• The driver’s seatbelt is unfastened.
• The Electronic Parking Brake is engaged (When the brake system warning light is illumi-
nated or flashing).
• When the EyeSight system has a malfunction. (“ ” (EyeSight Warning indicator:
Yellow) is turned on.)
• The steering wheel is turned significantly in either direction.
• The grade of the road is steep.
• The Pre-Collision secondary braking has activated.
WARNING
Do not use Conventional Cruise Control on slippery roads. Doing so may
result in an accident.
D
D
MPG
miles
S01914
OFF is
displayed.
MPH
D
D
B1232BE-A.book 83 ページ 2015年4月3日 金曜日 午前9時57分
Loading ...
Loading ...
Loading ...