Loading ...
Loading ...
Loading ...
APPENDIX
Problems Solutions
Cleaning is nished but
small dust particles come
out of the brush.
• After cleaning, operate the vacuum for 10 seconds or more to
suction up the small dust particles.
Vacuum cleaner stops
operation during cleaning.
• As this product has the overheating prevention device of the
brush motor, product will stop operation temporarily for the
following conditions.
– When the vacuum operates with a full dustbin.
– When the vacuum operates with suction part or brush
clogged.
– When the Extension Crevice Tool is used for long hours.
• Check these problems then turn the vacuum on after a while.
(This case may differ depending on the ambient temperature.)
Static electricity occurs
when cleaning a thick and
soft mat.
• Materials of a mat (childcare center mat, noise prevention mat
for between oors, etc.) may cause the static electricity.
– Move the brush on a normal oor for a while and clean again,
then the static electricity should disappear.
• This Vacuum cleaner is approved the following.
– The Low Voltage Directive 2014/35/EU
– The EMC Directive 2014/30/EU
English 31
VS7000_EN_00837E-00_UK_A5.indd 31 2020-02-06 오후 5:12:21
Loading ...