Loading ...
Loading ...
Loading ...
9
2. APPLIANCE DESCRIPTION
3. SAFETY SYSTEM
4. BEFORE FIRST USE
5. STARTING THE APPLIANCE
A.
Pusher
B.
Feed tube
C.
Cover
D.
Sieve
E.
Juice collector
F.
Pouring spout
G.
Motor unit
H.
Start and lock switch
I.
Pulp container
J.
Cord storage
K.
Foam separator
L.
Jug
M.
Cleaning brush
This appliance has an exclusive safety
system. To start the juice extractor, the
cover
(C)
must be correctly positioned
(fig. 4)
. At the end of the cycle, set the
switch
(H)
to "0" and wait until the sieve
• We recommend that you wash all
removable
parts (parts
A, C, D, E, F, I,
K, L
) before using the appliance for the
first time (see Section 7).
• Remove the appliance from its
has come to a complete stop before
removing the cover
(C)
. Once the
appliance has stopped you will be able
to remove the cover
(C)
.
packaging, then place it on a flat,
stable, heat-resistant working surface,
remove the cover
(C)
and
remove the
protective cardboard
from the sieve.
• Place the pouring spout
(F)
on the
juice collector
(E) (fig. 1)
.
• Place the juice collector
(E)
on the
motor unit
(G)
by tipping it slightly
forward and inserting the pouring
spout
(F)
into the hole provided for it
(fig. 2)
.
• Place the sieve
(D)
in the juice collector
(E).
Make sure that the sieve is correctly
fitted onto the drive shaft
(fig. 3)
.
• Position the cover
(C)
on the motor
unit
(G) (fig. 4)
.
• Place the pulp container
(I)
on the
back of the appliance
(fig. 5)
.
• Place the Jug
(L)
or a glass under the
pouring spout
(F)
at the front of the
appliance. If you wish to separate out
the foam from the juice, place the
foam separator
(K)
in the juice
collector
(L) (fig. 6)
. The juice
separator will retain the foam in the
juice collector when you pour the juice
into a glass.
• Cut the fruit or vegetables into pieces
after removing any pips if necessary.
• Plug in the appliance. The cord storage
(J)
compartment lets you adapt the
cord length.
• Start the appliance using the start
switch
(H)
.
• Insert fruit or vegetables using the filler
(B)
.
• Use the pusher
(A)
, without forcing, to
push the food down. Never use any
other utensil.
Fruit and vegetables must always be
fed into the appliance with the motor
running. Never apply excessive
pressure to the pusher
(A)
. NEVER PUSH
with your fingers, always use the Pusher
supplied.
• Once you have finished, stop the
appliance using the switch
(H)
and
wait until the sieve
(D)
has come to a
complete stop.
• When the pulp container
(I)
is full or
when the flow of juice from the
appliance slows, empty the collector
and clean the sieve
(D)
.
Notice 2550752-03__Mise en page 1 24/05/11 15:16 Page 9
Loading ...
Loading ...
Loading ...