Loading ...
Loading ...
Loading ...
Install cable
1. Route cable through slot in top cover, through pulley bracket, and down through guide rod plate.
2. Install two BHSCS and two pulley shaft bolts securing lower pulley assembly to pulley bracket using two 5/16”
Allen wrenches.
QtyDescription
1Pulley shaft bolt1
1BHSCS2
1Lower pulley assembly3
1Pulley bracket4
3. Install two BHSCS and two pulley shaft bolts securing top two pulley assemblies to pulley bracket using two
5/16” Allen wrenches.
QtyDescription
2Pulley shaft bolt1
2BHSCS2
2Top pulley assembly3
1Pulley bracket4
4. Squeeze sides of top weight cover together and lift up. Pull down on cable until it is tight. Install spiral pin
connecting cable to top weight.
QtyDescription
1Top weight cover1
1Spiral pin2
5. Verify the cable is moving smoothly.
6. Install back panel.
Page 16 of 25
Loading ...
Loading ...
Loading ...