Loading ...
Loading ...
Loading ...
84
Problem Possible Cause Solution
The media is not fed
correctly.
Make sure the Front Label Guide touches
the edge of the Media Guide Tips.
RTC time is incorrect when
rebooting the printer.
The coin battery has
dislodged.
The coin battery has finished.
Contact the product manufacturer's
customer service or your local dealer.
The left side printout position
is incorrect.
The label size is set up
incorrectly.
Set the correct label size.
The Shift X setting is
incorrect.
Fine-tune the Shift X setting. For more
information, see 7.1.1 FBPL Settings
.
The printing position of small
labels is incorrect.
The media sensor sensitivity
is not set correctly.
Calibrate the sensor sensitivity again.
The label size is incorrect.
Set the correct label size and gap size.
The Shift Y setting is
incorrect.
Fine-tune the Shift Y setting. For more
information, see 7.1.1 FBPL Settings
.
The vertical offset setting in
the driver is incorrect.
If using the BarTender software, set the
Vertical Offset in the driver.
Loading ...
Loading ...
Loading ...