Loading ...
Loading ...
Loading ...
FIXING THE ANCHOR SCREWS
• Check the ceiling material and the thickness of the finish material. The provided anchor screws can only be used if the
ceiling is made of concrete. Do not mount the device on ceilings made of plaster board or medium-density fiberboard
(MDF).
1 2 3
Anchor screw for
ceiling mount
4 5
Washer/
Nut
6
1
Drill a hole 45 mm to 55 mm deep using a 14.5 mm drill bit on the position you want to install your anchor.
2
Clean out the drilled hole.
3
Insert the provided anchor screw into the hole.
4
Place the ceiling mount close to the ceiling so it matches the position of the screws.
5
Fasten the washers and nuts in order. Tighten the screws using a torque of at least 45 kgf/cm.
6
Tighten the washers and nuts until they are completely fastened.
9
ENGENGLISH
Loading ...
Loading ...
Loading ...