Loading ...
Loading ...
Loading ...
98
For your information, the following temperature settings are included as a guide.
DESCRIPTION OF OVEN
TEMPERATURES
Degrees Celcius °C Degrees Farenheit °F Gas Mark
Very Low 120 250 ½
Low 140-150 300 1-2
Moderately Low 160 325 3
Moderate
180 350
4
Moderately hot 200 400 6
Hot 220 425 8
Very Hot 240 475 9
Note: If using fan forced ovens be sure to turn the temperature down by 20°C.
Please refer to your oven manufactures instruction guide Also check recipes at the
back of this booklet.
Oven Temperature Guide
Care and Cleaning
Before cleaning your Sunbeam Planetary
Mixmaster
®
, ensure that the power is
turned off at the power outlet, then remove
the plug. Wipe over the outside area of the
Planetary Mixmaster
®
including the head
and base, with a dampened cloth and polish
with a soft dry cloth.
Wipe any excess food particles from the
power cord.
Sunbeam recommends to wash the mixing
bowl, scraper beater, beater, whisk and
dough hook, in warm soapy water and wipe
dry – use a brush if necessary to remove
any sticky food particles.
All plastic components deteriorate through
prolonged dishwasher use. However, parts
of your Planetary Mixmaster
®
are tolerant
to dishwasher use. These include the
stainless steel mixing bowl, scraper beater,
beater, whisk and dough hook.
Maintenance Service
Your Sunbeam Planetary Mixmaster
®
should be regularly checked. After
approximately four years of domestic use,
the grease in the gear compartment should
be examined. We suggest at that time you
send the mixer to your nearest Sunbeam
Appliance Service Centre to ensure
efficient, correct servicing.
Storage
Keep your Sunbeam Planetary Mixmaster
®
Bench Mixer in a convenient position on
your kitchen bench ready for use at all
times. Place the scraper beater, beater,
whisk, dough hook, splash guard and
pouring spout in the mixing bowl as storage
of these attachments in a drawer with other
kitchen equipment may cause damage.
Note: Never wind the power cord around
the mixer after use as the warmth from
the motor may cause damage to the
power cord.
Note: Place only on the top rack of the
dishwasher.
Problem Possible Cause What to do
Motor will not start. Motor is over-heated.
Mixer head is not
locked down properly.
Unplug and allow motor to cool, (the
mixer head should be cool to touch).
Move mixture in mixing bowl to the
side of the attachment, to allow the
attachment to go all the way into the
bowl.
Motor is over-heated. Use of a high speed for
a long time.
Mixture too heavy.
Mixing quantity too
large.
Switch the mixer off and unplug it from
the power point. Release the mixer
head and tilt it back until it is locked
into the tilt back position. Let the mixer
rest for 30 min to allow the motor to
cool.
Try mixing in batches and do not
operate for more than 3 mins as this
may cause over heating'
Mixer head does not
lock down properly.
Thick mixture is
preventing the
attachment from going
all the way down into
the bowl.
Move mixture in mixing bowl to the
side of the attachment, to allow the
attachment to go all the way into the
bowl.
Attachment is hitting
the bowl.
Attachment is not
inserted correctly.
Mixing bowl is not
locked into the base
properly.
Remove the attachment and
try inserting again. Refer to the
instructions in this booklet if needed.
Lock bowl into position. Refer to the
instructions in this booklet if needed.
Mixer is moving on
the benchtop.
Chosen speed is too
high for the mixture.
Mixture caught up in
the attachment.
Flour or spills on
bench top.
Lower the speed or mix in batches.
Scrape down the attachment and
continue mixing.
Clean and dry benchtop as well as the
mixer base.
Troubleshooting Guide
MXM5000_19EM1.indd 8-9 9/2/19 3:18 PM
Loading ...
Loading ...
Loading ...